Download >>> https://tinurli.com/281zoh
This is a short article on how to design, create, and build a music instrument. The primary focus will be on the initial construction of the instrument itself. This plan is for a funky rocker drum. Rock drums are an amazing way to enjoy making music with some drumming abilities. They are often used in jam sessions among musicians who may or may not have any formal musical background or training. The drums are constructed from scrap materials that are readily available at your local hardware store or home improvement center. It is suggested that you use 2x4 board or other type of sturdy wood that has a thickness of 1/2". The wood selected for the drum body and the top surface will determine the finish of the drum. If it is a bright shiny finish, then drill holes in the bottom and top of each board. This will allow you to attach nails to secure the drum top to the base. The holes should be slightly larger than your nails so that they can be sunk in easily. The hole locations should also be at least 4" away from each end of the board for extra stability when attaching them to each other with nails or screwing them together with a hammer. After securing the boards together, paint or stain it to achieve a finish that you are happy with. Once the drum body is assembled, you will need to decide on which type of bracing for the top will best serve your needs. The bracing of this drum is recommended for a standard rock band style music player. It consists of 2 X 4's that are screwed into the bottom of the body along each of its edges. This will create more stability and durability by holding all 4 sides together while also giving attack and volume to the drum. Next construct a sound system using power cords, switches, microphones, small speakers, etc.. You can purchase all of the components to finish your drum for this step. The next step is to bolt together the drum shell with the top bracing. It is recommended that you use 2×4 board again for this step. The boards should be screwed into each other using just enough pressure so that they are not wobbly or loose, but not so tight that it prevents any air from circulating. After you have screwed these two boards together, assemble both on a flat surface and measure from the wall to see if it fits in its proper location. If there is any space on either side or on top of the drum, then add a 1/4" x 2" piece of wood between these boards to give it some depth. After this is finished, you can screw the top of the drum to the bottom board. Again, just snug enough so that it is not wobbling or loose. With this step you are ready to construct your sound system. If you used power cords, then all of the electrical connections will be ready to go. If you are using microphones for this drum then be sure to check out some online videos on how to make connections with microphones. You may want some form of lighting for your drum if it is going to be used in a dark room or at night while playing live with an electronic band. cfa1e77820